Push Off Grass Fork

+

The Prodig Push Off Grass Fork is designed to quickly and efficiently handle high volumes of grass silage on Large Horsepower Tractors and can also be used on Tele-Handlers/Wheeled Loaders.

  • Designed for use on large tractors & loaders.
  • Heavy duty construction using High Yield structural hollow sections and plates.
  • Available in widths from 2.5m to 3.6.
  • 1400mm square profile Hardox tines used in bottom bar for long service life.
  • Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced.
  • 40mm pivot points fitted with greasable bushings.
  • Hardened cutting edge wear plates on bottom section.
  • Fitted with Hydraulic equalizer valve and buffer pads to reduce impact on gate.
  • Greasable bushings on all pivot points.

  1. 40mm Hardox steel by 1.4m (55’’) tines used in bottom bar for long service life.
  2. 40mm pivot point pin fitted with replaceable bushings.
  3. Bushings and grease points on all pivot points.
  4. Fitted with Hydraulic equalizer and buffer pads as standard.
  5. Hardened cutting edge wear plates on bottom section.

 

Push Off Grass Fork POGF 2500 POGF 2750 POGF 3000 POGF 3300 POGF 3600
Height (mm) 1475 1475 1475 1475 1475
Width (mm) 2500 2750 2995 3300 3600
Depth (mm) 1420 1420 1420 1420 1420
Weight (kg) 950 1050 1165 1235 1300
Tine lenght 1400mm (55'') 1400mm (55'') 1400mm (55'') 1400mm (55'') 1400mm (55'')
Tine width 40mm Hardox 40mm Hardox 40mm Hardox 40mm Hardox 40mm Hardox
Number of bottom Tines 10 11 12 13 14
Number of Side Tines 2 each side 2 each side 2 each side 2 each side 2 each side
Tine Spacing (mm) 230 230 230 230 230
Ram 2 x 70mm Bore 2 x 70mm Bore 2 x 70mm Bore 2 x 70mm Bore 2 x 70mm Bore

All measurements approx (±5mm, ±5kg)
Weight excludes brackets as these vary

 

 

 

 

Ask about this product