Contractor Grass Fork

The Prodig Contractor Grass Fork is designed for Large and Medium Wheeled Loaders handling grass silage in compact areas or with lower volumes.

  • Designed for use on Articulated Loaders.
  • Available in widths from 2.5m to 3.6m.
  • Heavy duty construction using High Yield structural hollow section and plate.
  • 1400mm square profile Hardox tines used in bottom bar for long service life.
  • Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced.
  • Bottom wear pads made from 400 Brinell cutting edge.
  • Full width spill frame to increase capacity and prevent spillage of material onto the loader.
  • Hitches available to suit all machines.

 

1. Heavy duty construction using structural hollow sections and plates.
2. 1.4m long 40mm (1 ½ “) thick Hardox tines for long life.
3. Full width spill frame to prevent spillage of material onto the loader.
4. Bottom and side wear plates made from hardened cutting edge.

Contractor Grass Fork CF 2500 CF 2750 CF 3000 CF 3300 CF 3600
Height (mm) 1415 1415 1415 1415 1485
Width (mm) 2500 2750 2995 3300 3600
Depth (mm) 1470 1470 1470 1470 1470
Weight (kg) 570 620 670 720 770
Tine length (mm) 1400 1400 1400 1400 1400
Tine Spacing (mm) 220 220 220 230 230
Number of tines 10 11 12 13 14

 All measurements approx (±5mm, ±5kg)
Weight excludes brackets as these vary

PRODIG-CONTRACTOR-GRASS-FORK-G07
PRODIG-CONTRACTOR-GRASS-FORK-G06
PRODIG-CONTRACTOR-GRASS-FORK-G12
PRODIG-CONTRACTOR-GRASS-FORK-G08
PRODIG-CONTRACTOR-GRASS-FORK-G09
PRODIG-CONTRACTOR-GRASS-FORK-G10
PRODIG-CONTRACTOR-GRASS-FORK-G11
Previous Next Play Pause
PRODIG-CONTRACTOR-GRASS-FORK-G07 PRODIG-CONTRACTOR-GRASS-FORK-G06 PRODIG-CONTRACTOR-GRASS-FORK-G12 PRODIG-CONTRACTOR-GRASS-FORK-G08 PRODIG-CONTRACTOR-GRASS-FORK-G09 PRODIG-CONTRACTOR-GRASS-FORK-G10 PRODIG-CONTRACTOR-GRASS-FORK-G11
 

 

Ask about this product